发布时间 : 星期日 文章使用AVS+MeGUI压制PSP用480P&272P详细教程更新完毕开始阅读73e6d762783e0912a2162ad0
这一区域就不要去动了,除非你为了压好之后刻录成BD盘让BD播放器播放
Nb of slices by Frame:--slices:
设定每个帧的切片数,而且强制为矩形切片;会被slice-max-size (最大切块体积[单位为字节]),和slice-max-mbs (最大切块体积[单位为宏区块])覆盖。为蓝光播放机刻盘而编码,需要设置为4,不是为蓝光播放机刻盘而编码的话,建议默认设置 0。设置为0以外的参数会降低压缩效率。
Max size(in bytes):--slice-max-size:最大切块体积(单位为字节)
Max size(in mbs):--slice-max-mbs:最大切块体积(单位为宏区块)
另附上这一区域的英文释义 slices Default: 0
Sets the number of slices per frame, and forces rectangular slices. (Overridden by either --slice-max-size or --slice-max-mbs if they are set.)
If you are encoding for Blu-ray, set this to four. Otherwise, don't use this unless you know you need to.
See Also: --slice-max-size, --slice-max-mbs.
slice-max-size Default: 0
Sets the maximum slice size in bytes, including estimated NAL overhead. (Currently is not compatible with --interlaced.) See Also: --slices
slice-max-mbs Default: 0
Sets the maximum slice size in macroblocks. (Currently is not compatible with --interlaced.) See Also: --slices
Rate-Control
1.Quantizers选项区
Min/Max/Delta:
Min:--qpmin:设置最小量化值,范围0-51; 默认值:10
Max:--qpmax:设置最大量化值,范围0-51; 默认值:51
Delta:--qpstep:设置相邻帧之间的量化值差,范围0-50。 默认值:4
(注意:该选项的三个空按从左到右分别对应Min、Max、Delta!)
Quantizers Ratio(I:P/P:B):
Quantizers Ratio I:P:--ipratio:I帧和P帧之间的量化系数; 默认值:1.4
Quantizers Ratio P:B:--pbratio:P帧和B帧之间的量化系数。 默认值:1.3
(注意:该选项的两个空从左到右分别对应Quantizers Ratio I:P、Quantizers Ratio P:B!)
Deadzones(Inter/Intra):
Deadzones Inter:--deadzone-inter:设置inter模式下,亮度死区量化值,范围0-32; 默认值:21
Deadzones Intra:--deadzone-intra:设置intra模式下,亮度死区量化值,范围0-32; 默认值:11
(注意:该选项的两个空从左到右分别对应Deadzones Inter、Deadzones Intra!)
Chroma Qp Offset:--chroma-qp-offset:色度和亮度之间的量化差,范围-12-12。 默认值:0
Credits Quantizer:演员表量化值。